ACER
ACER OMW120B Gaming RGB Tri-Mode Mouse
Quantity:
A. Product introduction
①Left button, ②Right button, ③Middle button, ④DPI button, ⑤Forward button, ⑥Back button, ⑦Light effect switch button, ⑧ Type-C charging port/wired port
feature of product
·A variety of RGB colorful lighting effects, full of brilliance, all in hand
The six-speed DPI of the mouse can be adjusted, and the enhanced performance can be easily adapted regardless of office, entertainment, and enhanced performance.
·Three operating modes of the mouse, wired, wireless 2.4G, and Bluetooth three modes seamlessly switch, making you hilarious
Technical Specifications
Sensor: Optical
Mode: Wired, 2.4G, Bluetooth
Transmission distance: 10 meters
Number of keys: 7
DPI gear: 500-1600-2400-3200-4000-4800
Switch life: about 10 million times
Battery Specifications: 3.7v/600mAh
Charging current/voltage: DC 5V 230mA
Interface: USB
USB cable length: 1.6 meters
Weight: 67 grams
Dimensions: 120.5 x 63.5 x 41.5 mm
Operating system support: PCs, laptops, and other devices compatible with USB interface/Bluetooth connection
System Requirements
Compatible with USB/Bluetooth connected PCs, laptops, and other devices; Windows 7 or higher operating system.
B. Safety Precautions
• Keep equipment dry. Keep away from precipitation, humidity, various liquids, and condensation.
·Do not use this product with wet hands.
·Do not use or store the device in dusty or dirty places.
· Do not store the device in high or low-temperature conditions (this may damage the device).
· Do not drop, knock or shake the device (use may cause damage).
c. to install
This product adopts a 2.4G receiver and wired and Bluetooth connection. The wired mode is plug and play, no need to install drivers. (For advanced mouse configuration, download and install the dedicated driver.)
D. Instructions for use
1. Description of the switch at the bottom of the mouse
The switch at the bottom of the mouse is toggled forward to 2.4G mode, toggled back to Bluetooth mode, and in the middle is the power-off state.
can have a picture
2. Wired connection and charging method
1) Insert the Type-C data cable into the charging port of the mouse, and connect the other end of the USB to the USB interface of the device, then it can be used in wired connection mode;
2) This operation can also charge the mouse at the same time. When the voltage is lower than 3.4V, the decorative light will go out, and the light will flash red when it works. Please charge it in time. When setting, the charging indicator is always red, and when fully charged, the indicator is green, and the mouse will stop working when it is lower than 3.2V.
.
3. Wireless 2.4G connection
Move the bottom switch forward to 2.4G mode, press and hold the key combination (left button + middle button + right button) until the overall light of the mouse flashes yellow, take out the 2.4G receiver at the bottom of the mouse and insert it into the USB port of the device. Wireless 2.4G connection mode is used.
4. Bluetooth connection
Toggle the bottom switch back to Bluetooth mode, long press the key combination (left button + middle button + right button) until the overall light of the mouse flashes blue, turn on the Bluetooth device to search for the Bluetooth name OMW120B, and click connect to use it in Bluetooth mode.
5. Mouse sleep and wake up method
When in wireless mode, when the mouse is left for 1 minute, the mouse light effect will automatically turn off, and after 6 minutes of standing the mouse, the mouse will enter a deep sleep state, and the power consumption will be minimized at this time. Click the mouse button to wake up. The mouse works fine.
.
E. Troubleshooting
If this is not correct, follow these steps:
1. Check the integrity of the connector;
2. Check whether the connection to the computer is correct;
3. Check the correctness of the computer settings;
4. Disconnect and reconnect the device; restart the computer.
①Left button, ②Right button, ③Middle button, ④DPI button, ⑤Forward button, ⑥Back button, ⑦Light effect switch button, ⑧ Type-C charging port/wired port
feature of product
·A variety of RGB colorful lighting effects, full of brilliance, all in hand
The six-speed DPI of the mouse can be adjusted, and the enhanced performance can be easily adapted regardless of office, entertainment, and enhanced performance.
·Three operating modes of the mouse, wired, wireless 2.4G, and Bluetooth three modes seamlessly switch, making you hilarious
Technical Specifications
Sensor: Optical
Mode: Wired, 2.4G, Bluetooth
Transmission distance: 10 meters
Number of keys: 7
DPI gear: 500-1600-2400-3200-4000-4800
Switch life: about 10 million times
Battery Specifications: 3.7v/600mAh
Charging current/voltage: DC 5V 230mA
Interface: USB
USB cable length: 1.6 meters
Weight: 67 grams
Dimensions: 120.5 x 63.5 x 41.5 mm
Operating system support: PCs, laptops, and other devices compatible with USB interface/Bluetooth connection
System Requirements
Compatible with USB/Bluetooth connected PCs, laptops, and other devices; Windows 7 or higher operating system.
B. Safety Precautions
• Keep equipment dry. Keep away from precipitation, humidity, various liquids, and condensation.
·Do not use this product with wet hands.
·Do not use or store the device in dusty or dirty places.
· Do not store the device in high or low-temperature conditions (this may damage the device).
· Do not drop, knock or shake the device (use may cause damage).
c. to install
This product adopts a 2.4G receiver and wired and Bluetooth connection. The wired mode is plug and play, no need to install drivers. (For advanced mouse configuration, download and install the dedicated driver.)
D. Instructions for use
1. Description of the switch at the bottom of the mouse
The switch at the bottom of the mouse is toggled forward to 2.4G mode, toggled back to Bluetooth mode, and in the middle is the power-off state.
can have a picture
2. Wired connection and charging method
1) Insert the Type-C data cable into the charging port of the mouse, and connect the other end of the USB to the USB interface of the device, then it can be used in wired connection mode;
2) This operation can also charge the mouse at the same time. When the voltage is lower than 3.4V, the decorative light will go out, and the light will flash red when it works. Please charge it in time. When setting, the charging indicator is always red, and when fully charged, the indicator is green, and the mouse will stop working when it is lower than 3.2V.
.
3. Wireless 2.4G connection
Move the bottom switch forward to 2.4G mode, press and hold the key combination (left button + middle button + right button) until the overall light of the mouse flashes yellow, take out the 2.4G receiver at the bottom of the mouse and insert it into the USB port of the device. Wireless 2.4G connection mode is used.
4. Bluetooth connection
Toggle the bottom switch back to Bluetooth mode, long press the key combination (left button + middle button + right button) until the overall light of the mouse flashes blue, turn on the Bluetooth device to search for the Bluetooth name OMW120B, and click connect to use it in Bluetooth mode.
5. Mouse sleep and wake up method
When in wireless mode, when the mouse is left for 1 minute, the mouse light effect will automatically turn off, and after 6 minutes of standing the mouse, the mouse will enter a deep sleep state, and the power consumption will be minimized at this time. Click the mouse button to wake up. The mouse works fine.
.
E. Troubleshooting
If this is not correct, follow these steps:
1. Check the integrity of the connector;
2. Check whether the connection to the computer is correct;
3. Check the correctness of the computer settings;
4. Disconnect and reconnect the device; restart the computer.